The conversion kits consists of a Zero pressure regulator and a gas carburetor; Zero pressure regulator, reduce the propane gas or nature gas from high to low and stable pressure before going to gas carburetor then to engine.
When generator stop working, the zero pressure regulator shut off gas supply also, so it's safe, you don't need to worry that gas still going to engine after is switched off.
After converted, generator power do not change. When working on propane gas, power depends on generator condition
User Instruction:Ways to start generator:- Start from propane gas:1. Close petrol switch (Make sure no petrol left in the carburetor)2. Open propane gas switch.3. Shut off choke valve switch, pull 3 to 4 times, the choke valve open to middle then open in full; when engine is hot, it will open and start directly.4. Turn on power switch5. Pull starter rope 4-5times(Choke valve shut off or open to middle)/(key)generator start6. After started, open choke valve switch on the carburetor mixer device7. Generator start normally
Generator shut off steps: First shut off propane gas tank switch, then shut off generator switch.
- Start from petrol:1. Shut off propane gas2. Open petrol3. Shut off choke valve switch on petrol carburetor4. Turn on power switch5. Pull starter rope several times, generator start6. After started, open choke valve switch on the carburetor mixer device7. Generator start normally
Gas and Petrol Carburetor
For 2kva - 4.5KVA Generators
Comes with metered Gas Regulator
Comes with 2 clips
Comes with 3yards hose
Very Economical to use
Affordable and Cheap